Serving Siloam Springs and the Northwest Arkansas metro (479) 427-7614
Light gray commercial metal roof from above

Metal Roofing in Siloam Springs, AR

Worth it on some houses and not on others.

Call (479) 427-7614

Two systems go by the name metal, and they behave differently once hail and time get at them.

Bring the metal decision to Siloam Springs Premier Roofing
You will hear back soon.

By submitting, you agree that we and one independent local roofing contractor may call, text, or email you about your roofing project, including by automated means. Consent is not a condition of purchase. Msg & data rates may apply; reply STOP to opt out.

What's included

Metal roofing systems used on Siloam Springs homes

Which metal system would Siloam Springs Premier Roofing's roofers put on a house like yours, and is either worth the jump from shingle? Standing seam on long simple runs, panel where the building or budget calls for it, and on plenty of houses it isn't metal at all.

Your roofer writes metal and shingle down together, so a decision this size doesn't hang on a remembered call.

Fasteners separate them. Standing seam hangs on clips beneath the ribs, so nothing holding the roof down ever meets weather. Panel takes its screws through the face, and those gaskets are what you watch across the years. Both land at double or triple an architectural shingle job.

Single-story commercial building under a dark metal roof

Tear-off and deck check

Everything above the deck comes off. Soft boards show up while it is bare.

Underlayment over the deck

Underlayment covers the whole deck. It backs the metal up when rain drives sideways.

Drip edge, in order

Eaves get drip edge underneath, rakes on top. Reversed, water reaches the fascia.

Flashing at every transition

Chimneys, walls, valleys and boots get new flashing. Most leaks start at one.

Panel layout and hold-down

Standing seam clips in; panel screws down. Layout follows the roof's own runs.

Trim and ridge closure

Closures and trim finish the ridge and ends. They shut out wind-driven rain.

Call (479) 427-7614Price this work

When metal is worth it in Siloam Springs

The premium pays off on certain houses here. On a lot of roofs in town it never will.

You plan to stay

Metal pays back slowly. If you'll be here in twenty years, the math shifts.

Your second shingle roof

You've bought shingle twice already. Metal is what stops a third round of it.

Long, simple roof runs

Standing seam does its best work on long unbroken slopes. Valleys and dormers add seams.

A porch or addition

Shingles sit near the edge of their pitch on a shallow porch. Panel handles it.

Screws backing out already

Older panel roofs lose their screw gaskets over time. Re-gasketing buys a few years.

The houses it doesn't suit

Short stay, cut-up roofline, tight budget. Shingle is the better buy on plenty of houses.

How a metal roof goes on

Metal waits on material first. Once the panels land, the roof is the shorter half.

1

Measure before ordering

The roofer measures the slopes first. Panels come cut to those lengths.

2

Strip and dry in

A local roofer strips to bare deck. Underlayment and drip edge dry it in.

3

Panels and flashing

Panels go on run by run. Flashing follows at chimneys, valleys and sidewalls.

4

You walk the roof

You walk it when it is done. Look hard at the ends and edges.

What it costs

Metal against shingles on price and lifespan

$19,920 to $35,280

The total above works off 24 squares of finished roof surface, the planning size the regional cost table carries. Steeper, bigger or more cut up moves it.

A square of metal is $830 to $1,470. The same square in architectural shingle is $410 to $690, and there's no dressing that gap down. Service life buys it back: standing seam runs in excess of 60 years, asphalt to a planning figure near twenty. The seam sealant gives out first; the metal outlives it. Our roofers itemize both coverings before you choose, so you weigh two figures you can hold. Range shopping belongs on the full cost guide.

$830 to $1,470 per square · Pitch, the count of valleys, and whether the deck needs work move it most.

Regional planning ranges for Northwest Arkansas, not a quote. Your roof sets the real number.

See what my roof would run See the full cost guide
Arched windows and a gray shingle roof mark this brick ranch home beneath scattered clouds

Siloam Springs metal roofing questions answered

Metal wants more money at the start and gives decades back, so the questions turn sharper. These five settle most of it.

Less than you're imagining, and the reason sits under the metal. Barn and shop panel is fastened straight to open purlins, and the empty space underneath is what makes the drumming everybody remembers. A house roof carries plywood decking and a full layer of underlayment beneath the panels, and that changes the sound entirely. You'll still hear hard rain. You won't hear a barn.
Better than shingle where it counts, worse where you can see it. The Benton County record for the past four years holds 100 hail reports, and 52 of those hit an inch or over, which is the size that starts denting metal panels. A dent is cosmetic; the panel sheds water afterward exactly as it did before, and the house stays dry. No metal roof is immune to being marked. There is more in the county storm record.
Insurance can treat a metal roof differently, and it's worth settling before you buy. Cosmetic damage is excluded under many policies, and a cosmetic-damage exclusion endorsement turns up on metal roofs in particular, so dents that never leak may not be covered. The only party who can tell you how your own policy reads is your carrier, and that is a phone call worth making early. Your roofer can photograph what the hail did to the panels; whether a premium moves is the insurer's decision alone. How claims work around here goes further.
Two to three times more, going by square: $830 to $1,470 a square for metal, $410 to $690 for architectural shingle. Those are Northwest Arkansas planning ranges, and nobody quotes a roof off them. Complexity is what moves metal fastest, because hips, dormers, valleys and steep pitch all mean more cuts and more flashing, and cuts cost more in metal than they do in shingle. The simpler the roof, the closer metal gets to reasonable.
Standing seam when you mean to keep the house and the slopes run long and clean; panel when it's a barn, a shop, an addition, or a budget with no give in it. Fasteners are the whole distinction: seam clips live under the ribs out of the weather, while panel screws pass through the face, and their gaskets are the maintenance item. Either way the estimate carries two warranties with two different backers behind them. Material coverage belongs to the manufacturer; the workmanship is our roofers' own, set down beside the price, and workmanship terms are worth precisely what the outfit signing them is worth. The warranty page breaks down what each one covers.
Talk it through
(479) 427-7614

Price your Siloam Springs metal roofing

Give our roofers the roof's age and whether this is a house you keep or a house you sell. The look that comes before any price costs nothing, and the quote behind it sets metal and shingle out line by line, in a document you keep, so what your own roof would run stops being a mystery. Take your time with the numbers.

Price both on my roof
Call Get a Free Estimate